Home  ›  NEWS  ›  NOVACAT A9 - Expanding a proven line of combination mowers Pöttinger

NOVACAT A9 - Expanding a proven line of combination mowers Pöttinger

NOVACAT A9

Expanding a proven line of combination mowers

The NOVACAT A10 mower combination from Pöttinger is joined by a younger brother: the NOVACAT A9. Together with a front mower, it covers a working width from 8.92 to 9.18 m and is packed with the same technical highlights.

The NOVACAT A9 can be used as a front/rear combination (headstock for 3.0 or 3.5 m front mower) and is extremely versatile: the working width is adjusted simply using the two mounting positions. The overlap in the narrowest position using a 3.0 m front mower and the rear mower combination is 52 cm; in the widest position using a 3.50 m front mower and the rear mower combination it is 60 cm.

The powerful centre frame combined with the new Y DRIVE driveline and hydraulic NONSTOP LIFT collision safety device  ensure that the NOVACAT A9 is prepared for the toughest conditions.

The mower combination is available with swath formers without conditioners, with ED tine-type conditioners or with RCB roller-type conditioners. Hydraulic cutter bar weight alleviation is included on all models.

Y DRIVE – New generation driveline

The special Y DRIVE input gearbox with bevel cut gears features an output shaft on the opposite side. This means that longer standard PTO shafts can be used with less angle. The backlash-free driveline using standard PTO shafts has been made possible by locating the overload clutches at the gearbox and by optimising the gear ratios. The constant velocity joint in the inside mower drum provides a stress-free link between the angular gearbox and the cutter bar. The result is a smooth running system that offers a higher output, even in tough conditions and in the headland position. This also extends service life significantly.

NONSTOP LIFT - the new hydraulic collision safety device

NONSTOP LIFT is an innovative technology that ideally protects the cutter bar. Fitted to both ends, the collision safety device enables the cutter bar to avoid obstructions efficiently. The special feature is that the boom is mounted on gimbals and is hydraulically preloaded by a triangular arm. The triggering pressure is displayed at the pressure gauge and is easily adjusted. When triggered, the boom folds backwards on the triangular frame and is also raised at the front by the gimbals - a three-dimensional collision safety system. The mower avoids impact with the obstruction so that damage to the cutter bar is prevented at higher driving speeds.

Proven a thousand fold – the NOVACAT cutter bar

The heart of the mower combination is the NOVACAT cutter bar proven thousands of times in the field with its standard quick-change blade system. Tapered disc surfaces, optimised counter-chop zone and generous overlap of the blade paths ensure perfect crop flow, first-class cutting quality and simultaneous optimum protection of the swath.

Compact during transport, space-saver when parked

For road transport, the mower hydraulically folds upwards and then is locked securely in the transport position. With a transport height of 4.0 m, a transport width of 2.95 and a ground clearance during transport of 31 cm with the narrowest working width and 18 cm with the widest, the NOVACAT A9 is compact during transport. Because the centre frame is at its lowest point in transport position, there is no risk of damage. The mechanical transport interlock is operated hydraulically and is standard on the machine. No lanyard is required. That ensures maximum convenience. Parking stands are provided so that the NOVACAT A9 can be stowed in the raised position to save a great deal of space.

Easy maintenance management using the control terminal

The mower combination is equipped with the SELECT CONTROL terminal as standard (requiring a double-acting remote valve). It allows pre-selection of the mower units, control of the folding side guards, the hydraulic transport interlock as well as setting weight alleviation using shut-off valves. The control terminal also has an integrated maintenance management feature: dependent on the operating time of the mower driveshaft, the control terminal displays which maintenance steps need to be performed on the machine.

First-class cutting quality, reliability, cost effectiveness and extended service life are the trademarks of the NOVACAT A9 mower combination made by Pöttinger, the world's No. 1 for front-mounted disc mowers.

Contact us

BULAGRO CENTER Stara Zagora
Central office Stara Zagora, Zheleznik District GPS coordinates: 42.410004, 25.591976 Phone: +359 42 600 171
BULAGRO CENTER Polski Trambesh
Polski Trambesh, Ring Road GPS coordinates: 43.370645, 25.643536 phone: (+359) 888 276 949
BULAGRO CENTER DOBRICH
Dobrich, 8 Anton Stoyanov Str. GPS coordinates: 43.589618, 27.819890 phone: (+359) 888 560 976
BULAGRO CENTER MONTANA
Montana, Industrial area north GPS coordinates: 43.409713, 23.239466 phone: (+359) 885 433 500
SPARE PARTS STORE Zafirovo
Zafirovo village, Silistra Region GPS coordinates: 43.987557, 26.822899 phone:(+359) 885 790 797
SPARE PARTS STORE Valchitran
Valchitran village, Pleven region GPS coordinates: 43.331179, 24.869169 phone: (+359) 885 083 311
Tenyo Tenev
Sales representative Agricultural machinery South region
Dobrin Dobrev
Service specialist Region Stara Zagora
Krastan Krastanov
Service specialist Region Stara Zagora
Milko Milkov
Service specialist Region Stara Zagora
Spas Mihov
Service specialist Bulagro Center Stara Zagora
Andrian Manev
Service specialist Region Stara Zagora
Ilian Gospodinov
Sales representative Agricultural machinery South-east region
Mitko Valchev
Service specialist Region Burgas
Stelian Georgiev
Sales Representative Agricultural machinery Varna Region
Alexander Rusev
Sales representative Agricultural machinery North-east region
Desislav Kosev
Sales representative Agricultural machinery Ruse Region
Ivelin Mesarabov
Service specialist Region Ruse
Ivan Ivanov
Service specialist Region Ruse
Anatoli Nikolov
Sales representative Agricultural machinery North central region
Biser Genov
Service specialist Region Pleven
Biser Dobranov
Service specialist Region Pleven
Kiril Nachev
Service specialist Region Pleven
Ivan Hristov
Sales representative Pleven region
Plamen Tsvetkov
Sales representative Agricultural machinery North-west region
Ivaylo Ivanov
Service specialist Region Vratsa
Lazar Kopanarov
Sales Representative Agricultural machinery South-western Region
Nikolay Cvetkov
Service specialist Service center Polski Trambesh
Radostin Cholakov
Service specialist Region Dobrich
Atanas Petrov
Service specialist Region Dobrich